The INGENIA IG3 TR is equipped with 2 premium 10" low frequency transducers and 1 1.4"compression driver. 

All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one.

Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence. 

INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility.

Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs  levels and imput devices.

.INGENIA can be easily and safely coupled through a  LP-IG accessory  which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation.

Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array. 

Technical Data
Speaker Type
2-Way Active Speaker
Acoustical data
Frequency Response [-10dB]
53 - 20.000 Hz
Frequency Response [-6dB]
57- 19.200 Hz
Max SPL
132 dB
HF
1.4"
HF Voice Coil
3''
Directivity (HxV)
110 x 90° (+20°/- 70°)
HF Type
Neodymium compression driver
Horn
Vertical asymmetric
Crossover Frequency
1100 Hz
LF
2x10”
LF Voice Coil
2.5"
LF Type
Neodymium
Amplifier
Amp Technology
Digipro® G3
Amp Class
Class-D
Peak Power
1800 W
RMS Power
900 W
User Interface
OLED display + rotative knob w/switch
Self-rotating display
Yes
Positioning
EPD (Element Position Detection)
Display Mirroring
Yes
Processor
Controller
DSP 56 bit
AD/DA Converter
24bit/48kHz
System Presets
Factory presets + User defined
Limiter
Dual Active Peak, RMS, Thermal
DSP Processing
FIR Linear Phase
Input
Signal Input
1 x Combo IN (XLR + Jack 6.3mm)
Signal Out
1 x XLR link OUT
USB connector
Yes - mini USB
Mechanics
Housing
Polypropylene PP reinforced
Grille
FULL /Invisible screws
Flyable
Yes
Handles
1x on top / 1x on bottom
Pole Mount
Yes
Width
280 mm (11.02 in)
Height
806 mm (31.73 in)
Depth
393 mm (15.47 in)
Weight
20.8 Kg (45.86 lbs.)